PR-6000 Tokyo KeiKi Vietnam

PR-6000 Tokyo KeiKi Vietnam, PR-6000 Tokyo KeiKi Viet nam , PR-6000 Tokyo KeiKi
TOKYO-KEIKI VIETNAM , TOKYO-KEIKI VIETNAM Vietnam

This high-grade autopilot model was designed with three fundamental concepts in mind: expanding and strengthening helm functions, thorough safety considerations, and improved reliability and more intelligent maintenance functions.

• IBS (Integrated Bridge System) compatibility
• Improved interface
• Complete range of controls
• Compatible with a variety of steering systems
• Safety considerations designed in
• Standard compatibility with digital output gyros

PR-2000 Tokyo KeiKi Vietnam

PR-2000 Tokyo KeiKi Vietnam,  PR-2000 Tokyo KeiKi Viet nam ,  PR-2000 Tokyo KeiKi
TOKYO-KEIKI VIETNAM , TOKYO-KEIKI VIETNAM Vietnam

This best-selling model has been installed in over 15,000 small and medium vessels including fishing boats, coastal craft, and merchant ships, and is renowned for its stable performance and ease of use.

• Designed for operational simplicity
• More affordable, with improved course holding ability
• Variety of system configurations (stand-alone model, GYLOT model, console model)
• Compatible with a variety of steering systems

 "GYLOT" is a registered trademark of TOKYO KEIKI.

TMG-30 Tokyo KeiKi Vietnam

TMG-30 Tokyo KeiKi Vietnam,  TMG-30 Tokyo KeiKi Viet nam ,  TMG-30 Tokyo KeiKi
TOKYO-KEIKI VIETNAM , TOKYO-KEIKI VIETNAM Vietnam

Optimal machine operation based on gyrocompass attitude navigational information
In excavation of complicated and interconnected underground tunnels for subways, water lines, and communication and power lines, accuracy in following plan lines is vital. Development of the new TMG-30 Series attitude sensing system for tunnel boring machinery is based on our experience on more than 1800 site applications and our expertise in advanced technology. The System's precision gyrocompass and servo-inclinometer offer real-time detection of azimuth angle, pitch & roll with stable attitude readouts. The small, lightweight and high precision, TMG-30 Series is a valuable aid in tunnel excavations, both large and small.

Features

• Small size, high accuracy
  Compared to our previous model, the sensor unit is approx. 30% smaller and the controller and power supply are approx. 70% smaller. Static accuracy is ± 0.05 deg.
• Real-time monitoring of machinery attitude
  Azimuth angle and pitch & roll can be displayed in real time, for continuous monitoring and accurate control of machinery movement.
• Efficiency
  Unlike laser and lightwave systems, there is no need for time-wasting resetting.
• Backup battery
  The backup battery assures continuous operation even in the event of a power supply failure.
• Monitoring
  With the easy-to-read monitor, communication errors, and other information is at your fingertips.
• System expansion
  Efficient excavation and accurate monitoring can be enhanced in combination with the TL300 Series Level sensing System and the Tellus Series Automated Position & Attitude-sensing System.

UFH-100 Tokyo KeiKi Vietnam

UFH-100 Tokyo KeiKi Vietnam,  UFH-100 Tokyo KeiKi Viet nam ,  UFH-100 Tokyo KeiKi
TOKYO-KEIKI VIETNAM , TOKYO-KEIKI VIETNAM Vietnam

 
looking for a highly accurate and reliable flow metering system? Check out the UFH-100!
Microwave level gauge is included as standard equipment!
UFH-100 flowmeter measures free surface flows of such fluids as...
Typical Applications 
・Supply water ・Agrigultural water
・River water ・Waste water
・process water ・industrial effuents

The TOKYO KEIKI UFH-100 ultrasonic flowmeter system for open channels employs the latest in ultrasonic and microwave technology.
Utilizing our wealth of know-how and technical expertise, the UFH-100 system combines an ultrasonic flow rate meter with a microwave level gauge to provide accurate and stable flowmeasurements.
It is applicable for liquids with free surfaces such as agricultural water, river water, waste water and industrial effluents.
Specifications

Measurable liquid	Applications: agricultural water, river water, process water, industrial effluents, etc. Water temperature: 0~40℃ /Turbidity: ≤ 10000 mg/L (degree)
Measurement water channel	Water channel width: 0.3~20m (circular water channels φ0.3~5m) Needed channel straight run: standard - upstream ≥ 10B, downstream ≥ 5B (B: water channel width, pipe diameter in case of circular water channel)
Measurement principle	Flow: flow velocity x channel cross sectional area (water level) computation method Flow velocity: ultrasonic pulse transit time difference method Water level s from existing or any 2 wire level gauge (DC 4~20mA can be utilized
Measurement range	Flow: 0~full water level flow	Flow velocity: 0~10m/s	Water level: 0~10m
Output signals	Flow: 4~20 mA DC (allowable load resistance within 750Ω) with arrester element Flow Pulse: Capacity AC 3~250V / DC 3~125V Flow velocity: 4~20 mA DC (option: allowable load resistance within 750Ω) Water level 4~20 mA DC (option: allowable load resistance within 750Ω)
Accuracy	Flow     Forward flow: less than ±3% of full scale             Reverse flow: not specified as it depends on channel structure (+/- 10mm or better accuracy for level gauge required.)
Alarm relay output	Water level measurement failure, flow velocity measurement failure
Display	16 digit x 16 digit LCD display (with backlight) Flow value: max. 6 digits (incl. comma, decimal point) Water level: max. 6 digits (incl. m unit, comma and decimal point) Flow velocity: max. 6 digits (including m/s unit, comma and decimal point) Operation status indication
Power source	AC90V - 132V (50/60 ±2Hz)   Standard AC180V - 250V (50/60 ±2Hz)   (Option)
Power consumption	AC100V approx. 30VA AC240V approx. 40VA
Ambient temperature	-10C degree ~ 50C degree
Ambient humidity	Less than 90% RH (non-condensation)
Main unit configuration	Wall mount type IP5X (IEC60529 / dust proof)
Weight	Approx. 10 kg (approx. 11 kg with ultrasonic water level gauge)

UFP-20 Tokyo KeiKi Vietnam

UFP-20 Tokyo KeiKi Vietnam,  UFP-20 Tokyo KeiKi Viet nam ,  UFP-20 Tokyo KeiKi
TOKYO-KEIKI VIETNAM , TOKYO-KEIKI VIETNAM Vietnam

Portable Ultrasonic Flowmeter UFP-20 Now Comes, Versatility ! Functionality ! Reliability !
The Portable Ultrasonic Flowmeter UFP-20, based on the same, ergonomically advanced design so popular in the UFP-10, features significant size reduction. The result is a portable ultrasonic flowmeter that meets next-generation standards.The UFP-20's single-handed portability means difficult and challenging jobs located in narrow or high places can now be performed safely and easily.

The flowmeter includes a thickness measurement function and can effectively measure the sound velocity of fluids. Measurement data can be printed, logged or transferred to a computer which can assist data collection and analysis.

Light Weight - 1.4 kg
Wide Display and Easy Operation
Pipe Range : 13 - 5000 mm
Transducer can use : -20 - +120C degree
Weather-proof structure : IP65

Multi-Flow Measurement Function
Easy configurable for 2-Channel or 2-Path measurement

2-channel:Multi-flow measurement

2-path:Higher Stability

Energy Meter Function
Energy flow rate measurements with Pt100 RTD option.

Receiving-Echo Monitor Function
Visual confirmation that receiving echo is “good”.

Weather-proof structure IP65
IP65 rating maintained even during measurement.

USB Memory Data Transfer
Logged data and site conditions can be storaged into internal memory.


Language selection
You can choose
English, French, German, Italian,Japanese, Portuguese, Russian, Spanish, and Turkish.

Example of flowmeter or massmeter basic system

Example of heatmeter basic system

UFH-100 Tokyo KeiKi Vietnam

UFH-100 Tokyo KeiKi Vietnam,  UFH-100 Tokyo KeiKi Viet nam ,  UFH-100 Tokyo KeiKi
TOKYO-KEIKI VIETNAM , TOKYO-KEIKI VIETNAM Vietnam

looking for a highly accurate and reliable flow metering system? Check out the UFH-100!
Microwave level gauge is included as standard equipment!
UFH-100 flowmeter measures free surface flows of such fluids as...
Typical Applications 
・Supply water ・Agrigultural water
・River water ・Waste water
・process water ・industrial effuents

The TOKYO KEIKI UFH-100 ultrasonic flowmeter system for open channels employs the latest in ultrasonic and microwave technology.
Utilizing our wealth of know-how and technical expertise, the UFH-100 system combines an ultrasonic flow rate meter with a microwave level gauge to provide accurate and stable flowmeasurements.
It is applicable for liquids with free surfaces such as agricultural water, river water, waste water and industrial effluents.
Specifications

Measurable liquid	Applications: agricultural water, river water, process water, industrial effluents, etc. Water temperature: 0~40℃ /Turbidity: ≤ 10000 mg/L (degree)
Measurement water channel	Water channel width: 0.3~20m (circular water channels φ0.3~5m) Needed channel straight run: standard - upstream ≥ 10B, downstream ≥ 5B (B: water channel width, pipe diameter in case of circular water channel)
Measurement principle	Flow: flow velocity x channel cross sectional area (water level) computation method Flow velocity: ultrasonic pulse transit time difference method Water level s from existing or any 2 wire level gauge (DC 4~20mA can be utilized
Measurement range	Flow: 0~full water level flow	Flow velocity: 0~10m/s	Water level: 0~10m
Output signals	Flow: 4~20 mA DC (allowable load resistance within 750Ω) with arrester element Flow Pulse: Capacity AC 3~250V / DC 3~125V Flow velocity: 4~20 mA DC (option: allowable load resistance within 750Ω) Water level 4~20 mA DC (option: allowable load resistance within 750Ω)
Accuracy	Flow     Forward flow: less than ±3% of full scale             Reverse flow: not specified as it depends on channel structure (+/- 10mm or better accuracy for level gauge required.)
Alarm relay output	Water level measurement failure, flow velocity measurement failure
Display	16 digit x 16 digit LCD display (with backlight) Flow value: max. 6 digits (incl. comma, decimal point) Water level: max. 6 digits (incl. m unit, comma and decimal point) Flow velocity: max. 6 digits (including m/s unit, comma and decimal point) Operation status indication
Power source	AC90V - 132V (50/60 ±2Hz)   Standard AC180V - 250V (50/60 ±2Hz)   (Option)
Power consumption	AC100V approx. 30VA AC240V approx. 40VA
Ambient temperature	-10C degree ~ 50C degree
Ambient humidity	Less than 90% RH (non-condensation)
Main unit configuration	Wall mount type IP5X (IEC60529 / dust proof)
Weight	Approx. 10 kg (approx. 11 kg with ultrasonic water level gauge)

UVH-2000 Tokyo KeiKi Vietnam,  UVH-2000 Tokyo KeiKi Viet nam ,  UVH-2000 Tokyo KeiKi
TOKYO-KEIKI VIETNAM , TOKYO-KEIKI VIETNAM Vietnam

Doppler Technology For Sewage, Wastewater or Industrial Effluents.
Accurate and stable flow measurements for open channels with Ultrasonic Pulse Doppler technology. The UVH-2000 measures velocity of flow which contain fine particles or slurries such as sewage and wastewater
The UVH-2000 flowmeter incorporates a velocity meter and level gauge to measure flows through pipes or open channels with free water surfaces of sewage, wastewater, industrial and other effluents containing fine particles, sludge or fine bubbles.
The UVH-2000 velocity meter employs Pulse Doppler technology, which provides flow velocities at multi-points on the ultrasound beam and an ultrasonic level gauge, which provides non-contact liquid level measurement.
The UVH-2000 is suitable for applications such as maintenance and flow management of industrial effluents, public utilities, sewage plants and sewage systems.
Specifications

Measurement Method	Flow velocity: Ultrasonic Pulse Doppler Fluid level: Ultrasonic Pulse Transit Time
Fluids	Sewage, waste water, Industrial Effluents, or other Fluids with suspended matters Fluids or small bubbles which reflect ultrasonic waves with a free water surface (turbidity, approx. 60~50,000 mg/L)
Fluid Temperature	0 ~ +40℃
Applicable open Channel	Open channels: Rectangular, Circular, etc. Closed Conduit  Dimensions of Circular type: Inner diameter φ250 ~ 5000mm  Dimensions of Rectangular. Width 250 ~ 5000mm
Measurement Range	Flow velocity: -5 ~ +5 m/s Water level: 0 ~ 5000 mm
Measurement Accuracy	Within ±3% of Full Scale
Main Unit Display	LCD: 16 x 16 Characters Displayed items: Flow rate/ Totalized Flow/ Flow Velocity/ Water Level,                  Measurement Units. and Functions (at configuration)
Power Supply	AC90 ~ 132V, 180 ~ 264V, DC19 ~ 29V
Power Consumption	Approx. 38VA (AC100V), approx. 58VA (AC240), Approx. 24W (DC24V)
Output Signals	Flow Rate: 4 ~ 20 mA   DC (allowable resistance: less than 750Ω) Totalized Flow: Photo MOS Relay (Insulated) Flow Velocity: 4 ~ 20 mA    DC (allowable resistance: less than 750Ω) Water Level: 4 ~ 20 mA    DC (allowable resistance: less than 750Ω) Flow Velocity Meter Malfunction Warning: Photo MOS Relay (Insulated) Level Gauge Malfunction Warning: Photo MOS Relay (Insulated) Forward Flow Reverse Flow Discrimination: Photo MOS Relay (Insulated)
Ambient Temperature	-10 ~ +50℃.
Ambient Humidity	Less than 90% RH (non-condensation)
Main Unit Weight	Approx. 16kg
Main Unit Dimensions	W332 x H520 x D170 (including mounting bracket)
Options	Multi Path Flow Velocity Measurement: Max. 4 Paths Level Measurement: Radar Level Gauge

KRG-10 Tokyo KeiKi Vietnam

KRG-10 Tokyo KeiKi Vietnam,  KRG-10 Tokyo KeiKi Viet nam ,  KRG-10 Tokyo KeiKi ,  KRG-10
TOKYO-KEIKI VIETNAM , TOKYO-KEIKI VIETNAM Vietnam

Non - Contacting Radar Level Gauge KRG-10 Now Comes,
Measurement Unlimited By the Imagination.
The KRG-10 measures liquid level by transmitting low energy radar pulses towarda liquid surface and receiving the radar echoes.
The travel time for the radar pulse is proportional to the distance between the gauge and the surface.

Features

±2mm High Accuracy
Advanced Echo Processing
Rapid Tracking
Flow & Volume Calculation
Wide Lin-Up for various applications
Explosion - proof
Intrinsically safe

Target Market

Petro - chemical
Fine - chemical
Pharmaceutical
Food
General industrial
Water distribution
Factory effluent

Specifications

General Specification	Frequency		26GHz
	Beam Angle		8°(4inch Cone antenna & PTFE Sealing antenna)
			18°(2inch Cone antenna & PTFE Sealing antenna)
			25°(1inch Rod antenna)
Measurement	MAX range		30m
	Accuracy		Cone & PTFE Sealing	±2mm
			Rod	±3mm
	Repeatability		±1mm
	Interval		1s
	Tracking rate		2m / sec max.
Display			5 digits LCD / 4 keys-menu-driven Level, Distance, Volume(Flow), Current, Signal strength selectable
Power Supply Signal Output	Power Supply (Loop-Powered)		DC10.5V ～ 36V (In case of Ex, the voltage is rated separately.)
	Signal Output		4 ～ 20mA + HART
	Alarm		Hold, 22mA or 3.6mA selectable
	Ambient Temperature		-40 ～ 70℃ (Non-Ex) / -40 ～ +60℃ (Ex)
Mechanical Specification	Tank Pressure		1.5MPa
	Tank Temperature		-40 ～ 200℃
	IP Class		IP66, NEMA4X
	ATEX	EN60079-0:2012 EN60079-1:2007 EN60079-11:2012 EN60079-26:2007 EN60079-31:2009	Ex ia
			II 1G Ex ia IIC T4 Ga Ta = -40℃ to +60℃, IP66 II 1D Ex ia IIIC T135℃ Da Ta = -40℃ to +60℃, IP66
			Ex d ia
			II 1/2G Ex d ia IIC T4 Gb / Ga Ta = = -40℃ to +60℃, IP66 (PTFE Sealing Antenna and Rod Antenna) II 2G Ex d ia IIC T4 Gb Ta = -40℃ to +60℃, IP66 (Cone Antenna)
	IECEx	IEC 60079-0:2011 IEC 60079-1:2006 IEC 60079-11:2011 IEC 60079-26:2006 IEC 60079-31:2008	Ex ia
			Ex ia IIC T4 Ga Ta = -40℃ to +60℃, IP66 Ex ia IIIC T135℃ Da Ta = -40℃ to +60℃, IP66
			Ex d ia
			Ex d ia IIC T4 Gb / Ga Ta = = -40℃ to +60℃, IP66 (PTFE Sealing Antenna and Rod Antenna) Ex d ia IIC T4 Gb Ta = -40℃ to +60℃, IP66 (Cone Antenna)
Function	- Multi-echo historical validation    - Disturbance noise elimination     - Distance filter window  - Bottom echo handler                - Double bounce handler             - Full-range search mode  - Volume calculation                   - Predict Output                        - Flow rate calculation (Weir / Flume)

MRG-10 Tokyo KeiKi Vietnam

MRG-10 Tokyo KeiKi Vietnam,  MRG-10 Tokyo KeiKi Viet nam ,  MRG-10 Tokyo KeiKi ,
TOKYO-KEIKI VIETNAM , TOKYO-KEIKI VIETNAM Vietnam

The MRG-10 measures liquid level by transmitting low energy radar pulses toward a liquid surface and receiving the radar echoes.

The radar pulse is virtually unaffected by the contents and atmosphere of the tank, temperature or pressure. Thus radar measurement is proven to be the most reliable gauging method in most applications. Furthermore, maintenance requirements are practically zero because no part of the gauge is in physical contact with the liquid.
These features make the MRG-10 very well suited for storage and buffer tanks in the chemical and water industry.

The MRG-10 is most appropriate for calm liquid surfaces. If you intend to use the MRG-10 to measure turbulent surface liquids, it may be recommended to employ a still pipe used in order to achieve a calm surface.

The MRG-10 is appropriate for storage tanks or buffer tanks that have relatively calm surfaces.

• Chemical and petroleum
• Pharmaceuticals
• Food and beverage

Other applications include:

• Industrial water such as river intake gates
• Water supply
• Sewage water treatment plant
• Hydraulic power station

♦Application Examples

Opne conduits
Tanks with turbulent surfaces

Specifications

1. General
Measuring principle	Time Flight impulse Radar technology
Operating frequency	6 GHz
Half power beam angle	Rod antenna: 30deg.,   Cone antenna 4": 34deg., 6": 22deg.,  8": 17deg.
Microwave output power	Max 1 μ W
Reference conditions	Free space reflection from metal surface, ambient temperature 25℃, atmospheric pressure
2.Display / Configuration
Local display	5 digit LCD display with 4 configuration buttons. Level, Ullage, Volume, Current or Amplitude output
HART hand held communicator	Rosemount communicator RS275, just display not for configuration
PC Remote configuration	Windows base setup and configuration software
3 Electrical
Power supply	Loop powered 16-36 VDC (16-30VDC in Ex applications)
Output	Analog DC4-20mA +HART
Output variable	Level, Ullage in m or ft. Volume in %, Amplitude in dB.
Signal on alarm	Hold, Low (3.9mA), High (22mA)
Cable entry	2-M20x1.5(Applicable Cable diameter : 6.5-9.0mm)
4. Mechanical
Antenna	Rod antenna, Cone antenna 4", 6", 8"
Antenna material exposed to tank	Rod antenna: PFA and SUS(316L,ext.version) Cone antenna: 4", 6", 8" SUS(316L), PTFE, Viton
Antenna dimension	See page 5 and 6
Housing / Enclosure	Casting Aluminum
Flange	On request or customer supply
Mass	3.3--4.3Kg, depend on antenna size
Height above flange	230 mm
5. Environment Condition
Max. pressure	10 bar. (145 psi)
Ambient temperature	-20 ℃ to 70 ℃ (-4°F to 158°F), LCD Display -20 ℃ to 70 ℃
Storage temperature	-40 ℃ to 80 ℃ (-40°F to 176°F)
Tank inside temperature	-20 ℃ to 150 ℃ (-4°F to 302°F)
Ingress protection	IP65
Vibration resistance	IEC 68-2-6/1G
Ex. Approval	TIIS Ex ia IIC T4
6 Measuring Performance
Instrument accuracy	+/- 10mm
Repeatability	+/- 1mm
Update interval	1 Second
Measuring range	Depend on Antenna type and products nature, see diagram at page 4

MRF-10 Tokyo KeiKi Vietnam

MRF-10 Tokyo KeiKi Vietnam,  MRF-10 Tokyo KeiKi Viet nam ,  MRF-10 Tokyo KeiKi ,  MRF-10
TOKYO-KEIKI VIETNAM , TOKYO-KEIKI VIETNAM Vietnam
 
Features

1. IP68 submergible
   Stormwater will not break MRF-10 by under the water.
2. Compact body (Height: 54mm)
   Height: 54mm, easy installation for narrow space like under the Manhole
3. Loop-Powered
   Easy replacement to existing Loop-powered instrumentations
4. HART communication
   HART protocol has been superimposed onto analog output
5. Easy Configuration
   Graphical PC software by HART
6. Simple one-piece structure
   No independent main console required

Specifications

General	Measuring principle	Time of Flight Impulse Radar Technology
	Operating frequency	5.8GHz
	Half power beam angle	Lengthwise: 50°/ Crosswise: 23°
	Display /Configuration	No display / Graphical PC Configuration available
Electrical	Power supply	Loop-powered 16 ~ 36V DC
	Output	Analog: 4-20mA + Digital: HART Protocol
	Output variable	Level,  Ullage (m or ft), Volume(%), Amplitude (dB)
	Signal on alarm	Hold, Low (3.9mA), High (22mA)
	Others	Arrester and 10m shielded twisted 3 - cores Cable are built-in.
Mechanical	Housing (Enclosure)	Body: Casting stainless steel (316 equivalent)/Antenna face: FRP
	Size	172 x 192 x 54mm (without Cable gland)
	Mass	Approx. 2.7kg (without Cable)
Environment	Ambient temperature	-20℃ ~ 70℃ (-4°F ~ 158°F)
	Ambient pressure	ATM
	Protection degree	IEC 60529 IP68 (10m Depth /24hr.)
Measuring Performance	Accuracy	±5mm (0.1 - 5m range) ±10mm (5 - 10m range)
	Repeatability	±1mm
	Update interval	1sec
	Measuring range	Up to 10m Max. Applicable circular channel: more than φ400mm

VD-10 Tokyo KeiKi Vietnam

VD-10 Tokyo KeiKi Vietnam,  VD-10 Tokyo KeiKi Viet nam ,  VD-10 Tokyo KeiKi ,
TOKYO-KEIKI VIETNAM , TOKYO-KEIKI VIETNAM Vietnam , TOKYO-KEIKI VIETNAM , TOKYO-KEIKI
 
OVERVIEW
The Vibration Detector is a safety device, which quickly detects abnormalities in mechanical equipment in order to help prevent breakdown.
The reliable performance of the Vibration Switch is time proven - it has received very favorable user response from the time it was first marketed over 30 years ago.
Specification

Type		Standard
Model		VD-10
Range	Setting range	0 ~ 44.1m/s2 (0 ~ 4.5G)
	Recommended range	4.9 ~ 44.1m/s2 (0.5 ~ 4.5G)
	Resolution	0.98m/s2 (0.1G)
Frequency range		0 ~ 300Hz
Accuracy		+/- 2.21m/s2
Output	Form	Relay output
	Contact form	S.P.D.T.
	Capacity	125/250V AC (3A) 48V DC (1A) 125V DC (0.5A) 250V DC (0.25A)
Reset	Operation	Manual reset : Reset button operation
		Remote reset: Remote reset by power supply
	Reset power	100 ~ 125V AC/DC (50/60Hz in AC power)
	Coil rating	100V AC/DC (5min) 110V AC/DC (3min) 115V AC/DC (2.5min) 125V AC/DC (2min)
		Rated current 0.23A
Power consumption		25VA
Environmental Condition	Temperature	-20C deg ~ +80C deg
	Humidity	10 ~ 95% RH (non-condensation)
Construction	Protection degree	IPX4 (JIS C 0920)
	Ex-approval	Not approved
Cable connection		Rc3/4 (PT3/4)
Case material		Mount; Aluminum casting (AC4C)
		Cover ; Aluminum alloy plate (A5052)
Color		Hammer tone Baked (N7)
Mass		Approx. 0.9Kg

DL-3000 Tokyo KeiKi Vietnam

DL-3000 Tokyo KeiKi Vietnam, DL-3000 Tokyo KeiKi Viet nam , DL-3000 Tokyo KeiKi
TOKYO-KEIKI VIETNAM , TOKYO-KEIKI VIETNAM Vietnam

Features

• Wide capability for various ship
  Laser of DL-3000 system targets against parallel part at the ship board and
  achieve stable measurement even for shallow drafted ship.
• Compliance with safety class
  Laser sensor is complied with safety standard JIS C 6802 class 1.
• Vivid-visuality
  Measured data is vividly displayed and also can be output as record data.
• Fully-functioned alarm system
  Variety of alarms such as over-speed alarm, ripping alarm and
  berthing angle alarm has been functioned for berthing support as safely.
• Variety option
  DL-3000 system can extend and connect with further option such as large
  display for vessel, Signal lamp alert, data telemetering etc.

Item	Description
Measuring item	Distance between Bow to Berth and Stern to Berth
Measuring method	Lase Pulse Echo
Measuring range	Distance	: -1 ~ 199m
	Speed	: 0~+/-99 cm/sec (+: Docking / -: Ripping)
	Angle coverage	: less than +/-15 deg.
Measuring accuracy	Distance : less than +/- 1m Speed : +/-1cm/sec
Display	15inch LCD display at System console / LED display at Berth side display
Indicating interval	1 ~ 60 sec (selectable by every 1sec)
Printing items	Distance, Speed, Date, Time, Print Script of LCD
Output (option)	RS232C or RS422
Speed Alarm	Max 99cm/sec (selectable by every 1cm/sec)
Ripping Alarm	Max 9.9m (selectable by every 0.1m)
Power supply	AC100V 50/60Hz
Power consumption	Less than 350VA including 2 x Laser sensor (12VA), Berth side display (12VA)
Laser emission	Safety Class 1 (JIS C 6802)